Adding external buttons
Adding external buttons
Hello everybody.
I have a big problem with my installation.
The original radio is this:
IQ Navi
But I have modified it to this:
The problem is that I need to add external buttons to control the radio. Tipical volume, next song, home...
I tried with an USB keyboard, the problem is that this USB keyboard only controls Android. Volumen for example, I can control Android volume but not output amp so in the radio doesn't affect the keyboard.
Any idea?
I suppose that there have to be any option on the motherboard to add external buttons.
This is the moderboard.
Thank you very much!
I have a big problem with my installation.
The original radio is this:
IQ Navi
But I have modified it to this:
The problem is that I need to add external buttons to control the radio. Tipical volume, next song, home...
I tried with an USB keyboard, the problem is that this USB keyboard only controls Android. Volumen for example, I can control Android volume but not output amp so in the radio doesn't affect the keyboard.
Any idea?
I suppose that there have to be any option on the motherboard to add external buttons.
This is the moderboard.
Thank you very much!
- Technics66
- Бывалый
- Сообщения: 236
- Зарегистрирован: 02 июн 2016 12:59
- Репутация: 91
- Откуда: Екатеринбург
Adding external buttons
karogs, тебе для тестов?
Авто: Citroen C4 Sedan. ГУ: Kaier Allwinner R16 Quad Core (FW: 0.1.924, MCU: 5.3.19-11-932-453101-160708-TURRUS)
Adding external buttons
Technics66, Не мне, а ему Txori82,
Adding external buttons
I'll try putting 14 resistor of 2k.
My doubt is if original steering wheel control will continue working...
My doubt is if original steering wheel control will continue working...
Adding external buttons
Txori82, Потом расскажете , что у Вас получилось)?
Adding external buttons
Now I have the steering wheel from CAN BUS.
Is a BMW E92
Is a BMW E92
- Мамай72
- Бывалый
- Сообщения: 1114
- Зарегистрирован: 01 июн 2016 11:15
- Репутация: 200
- Откуда: Волгоград
- Контактная информация:
Adding external buttons
Asottu touch 10,2", Android 8.1, RedMod крайний
https://www.drive2.ru/r/landrover/freel ... 955341144/
https://www.drive2.ru/r/landrover/freel ... 955341144/
Adding external buttons
No no,
My car has Steering Wheel control and works OK.
I need to add more external buttons. I have to convert the old BMW radio in control for the Android Radio.
I'm going to use this original radio to control the Android in addition to the steering wheel
I have install Android Radio on the original radio.
My car has Steering Wheel control and works OK.
I need to add more external buttons. I have to convert the old BMW radio in control for the Android Radio.
I'm going to use this original radio to control the Android in addition to the steering wheel
I have install Android Radio on the original radio.
- OttoSander
- Новичок
- Сообщения: 4
- Зарегистрирован: 04 фев 2017 01:25
- Репутация: 0
- Контактная информация:
Adding external buttons
Всем привет! Есть у кого-нибудь успех в данном деле? KEY1 и KEY2 нужно замыкать на массу чтобы получить рабочую кнопку?
- andrej29
- Бывалый
- Сообщения: 58
- Зарегистрирован: 07 янв 2017 17:33
- Репутация: 1
- Откуда: Москва-Витебск РБ
Adding external buttons
По-правде сказать несколько шокирован идеей ТС.Зачем,зачем менять шило на мыло?Понятно,что оригинальный ССС не очень,но есть же CIC, там и жёсткий диск,и,что немаловажно-БК,без которого на этой машине сложновато.Мало опций?Ставишь Комбокс,и у тебя появляется БТ,ЮСБ и прочее.Не нравится CIC,можно поставить NBT от ф-серий.
BMW-e39(2003,2.5D-Chip)+Allwinner R16 Cortex A7 Quad Core 1.6GHz+RedMod 6
Adding external buttons
I'm really happy with Android Pure installation. No CCC, no CID no BMW system. Only Android , Radio, BT, MP3, Cam...
Adding external buttons
Hello,
I have been looking the cables, and I only have KEY1. Key2 and GND goes to CanBus box. Is this usual?
I can use any ground and connect with Key1 to do the buttons?
I have been looking the cables, and I only have KEY1. Key2 and GND goes to CanBus box. Is this usual?
I can use any ground and connect with Key1 to do the buttons?
Adding external buttons
Any answer please?
I'm finishing the upgrade to 6 and I'll like to take key lines out before install the radio again in the car.
Thank you!
I'm finishing the upgrade to 6 and I'll like to take key lines out before install the radio again in the car.
Thank you!
- OttoSander
- Новичок
- Сообщения: 4
- Зарегистрирован: 04 фев 2017 01:25
- Репутация: 0
- Контактная информация:
Adding external buttons
Txori82, solution is very simple. I have similar case. If CanBus box is only used for steering wheel controls, remove it and use KEY2 by yourself. Use KEY1 and GND with different nominals resistor to achieve different buttons.
Adding external buttons
OttoSander писал(а):Источник цитаты Txori82, solution is very simple. I have similar case. If CanBus box is only used for steering wheel controls, remove it and use KEY2 by yourself. Use KEY1 and GND with different nominals resistor to achieve different buttons.
Sorry but I don't understand. If I remove the CanBus, how is going to work steering wheel?
Вернуться в «Ремонт и аппаратные доработки»
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 6 гостей